Specification
Characteristic | XS-FR-8800 | XS-FR-8801 | XS-FR-8802 | XS-FR-8802LC |
Whiteness | ≥88 | ≥88 | ≥88 | ≥88 |
Bromine Content % | 26±3 | 6±3 | 0.1 | 20±3 |
H₂O Content % | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 |
Relative Density | 1.5~1.7 | 1.1~1.2 | 1.5~1.7 | 1.5~1.7 |
Bulk Density | ~0.8 | ~0.6 | ~0.8 | ~0.6 |
Temperature Resistance | ★★★ | ★★★★ | ★★★★★ | ★★★★★ |
Precipitation Resistant | ★★★ | ★★★★★ | ★★★★ | ★★★★ |
Mobility | ★★★ | ★★★ | ★★★★★ | ★★★ |
Extrusion Temperature | ≤190℃ | ≤190℃ | ≤190℃ | ≤190℃ |
Glow wire | GWIT 750 ℃&GWFI 850 ℃ | |||
Applicability | Non Fil | Fill/Reinforced | Temp.Resistance Low Halogen |
Temp.Resistance |
Dosage % | XS-FR-8800 | XS-FR-8801 | XS-FR-8802 | XS-FR-8802LC | |||||||||
Padding % | 0 | 15 | 30 | 0 | 15 | 30 | 0 | 15 | 30 | 0 | 15 | 30 | |
Co-PP | 0.8mm V-2 | 2.5 | —— | —— | 2.5 | —— | —— | 2.5 | —— | —— | 2.5 | —— | —— |
1.6mm V-2 | 3 | —— | —— | 3 | —— | —— | 3 | —— | —— | 3 | —— | —— | |
3.2mm V-2 | 3 | —— | —— | 3 | —— | —— | 3 | —— | —— | 3 | —— | —— | |
0.8mm V-2 | 1 | —— | —— | 1 | 2-3 | 4-5 | 1 | 2-3 | 4-5 | 1 | 2-3 | 4-5 | |
Ho-PP | 1.6mm V-2 | 1 | —— | —— | 1 | 2-3 | 4-5 | 1 | 2-3 | 4-5 | 1 | 2-3 | 4-5 |
3.2mm V-2 | 1 | —— | —— | 1 | 2-3 | 4-5 | 1 | 2-3 | 4-5 | 1 | 2-3 | 4-5 | |
Remark |
Some fillers will affect flame retardancy(such as calcium carbonate, magnesium carbonate, etc.)It is |
Characteristic | XS-FR-8803 | XS-FR-8805 | XS-FR-8810 | XS-FR-8820 |
Whiteness | ≥92 | ≥88 | ≥88 | ≥88 |
Bromine Content% | 10±3 | ≤2 | 0.1 | 20±3 |
H₂O Content % | ≤0.5 | ≤0.5 | ≤1.0 | ≤1.0 |
Relative Density | 1.6~1.8 | 1.1~1.2 | 1.5~1.7 | 1.5~1.7 |
Bulk Density | ~0.8 | ~0.5 | ~0.8 | ~0.6 |
Temperature Resistance | ★★★ | ★★★ | ★★★★★ | ★★★★★ |
Precipitation Resistant | ★★★ | ★★★ | ★★★★ | ★★★★ |
Mobility | ★★★ | ★★★ | ★★★★★ | ★★★ |
Extrusion Temperature | ≤190℃ | ≤190℃ | ≤190℃ | ≤190℃ |
Glow wire | GWFI 800 ℃ | GWIT750 ℃/GWFI850 ℃ | ||
Others | Minor Filling | Minor Filling | Temp.Resistance Low Halogen |
Temp.Resistance |
Dosage % | XS-FR-8803 | XS-FR-8805 | XS-FR-8810 | XS-FR-8820 | |||||||||
Padding % | 0 | 5 | 30 | 0 | 5 | 30 | 0 | 15 | 30 | 0 | 15 | 30 | |
Co-PP | 0.8mm V-2 | 2.5 | 3 | —— | 2.5 | 3 | —— | 3 | 3 | —— | 3 | 10 | —— |
1.6mm V-2 | 3 | 3.5 | —— | 3 | 3.5 | —— | 3.5 | 3.5 | —— | 3.5 | 10 | —— | |
3.2mm V-2 | 3 | 3.5 | —— | 3 | 3.5 | —— | 3.5 | 3.5 | —— | 3.5 | 10 | —— | |
0.8mm V-Z | 0.8 | 1 | —— | 0.8 | 1 | —— | 1 | 1 | —— | 1 | 6 | —— | |
Ho-pp | 1.6mm V-2 | 0.9 | 1.2 | —— | 0.9 | 1.2 | —— | 1 | 1.2 | —— | 1 | 6 | —— |
3.2mm V-2 | 1 | 1.3 | —— | 1 | 1.3 | —— | 1 | 1.3 | —— | 1 | 6 | —— | |
Remark | Some fillers will affect flame retardancy(such as calcium carbonate, magnesium carbonate, etc.)It is recommended to add barium sulfate, mica powder, glass beads, etc. Talc powder should be of high silicon content. The combination of strong shearing screws is not recommended for screw shearing; There is no vacuum or low vacuum in the extrusion process. |
Manufacturing Facility in XUSEN
Professional XS-FR-8800 Series / Flame Retardant For PP V2 manufacturer in China, We currently achieved an annual production capacity of 12,000 tons. We can also OEM, simply wholesale XS-FR-8800 Series / Flame Retardant For PP V2 direct from manufacturer. We have our own production workshops and warehouses, equipped with complete production and quality inspection equipment.
Plastic flame retardants are a crucial component in modern materials science, offering an essential layer of safety to countless products we use daily. From electronics and furniture to vehicles and c...
READ MORE1. High flame-retardant efficiency Flame-retardant efficiency affects the amount of flame retardant added to the base material. Since flame retardants, especially halogen-free ones, can impact the ...
READ MOREThe adoption of halogen-free flame retardants brings about notable economic and environmental impacts. While initial costs may be higher compared to traditional halogenated products, the long-term ben...
READ MORE